DreamBox 100

Technical Features

    *  MPEG-2 hardware decoding
    *  2 x LED - status
    *  1 x Smartcard-Reader (Dreamcrypt CA)
    *  1 x Scart
    *  1 x S-Video
    *  10/100Mbit compatible Ethernet Interface
    *  USB-B
    *  S/PDIF Interface for digital bit stream out (AC-3)
    *  unlimited channel lists for TV/Radio

 

    *  channel-change time < 1 second
    *  full automatic service scan
    *  directly bouquet-lists
    *  EPG (electronic program guide)
    *  own videotext and subtitle
    *  multiple LNB-Switching control (DiSEqC)
    *  fully adaptable OSD in many languages
    *  Picture in Picture (PIP) and Picture in graphics (PIG)
    *  Zoom function

 
DreamBox DM100 technical data

DBS-Tuner:
Frequency Range 950 …. 2150 MHz
Signal Level - 65 dBm …. - 25 dBm
Signal-to-Noise Level 12 dB max.
DBS-Tuner Input Connector F-Type female
Input Impedance 75 Ohm
AFC +/- 3 MHz
Demodulation Shaped QPSK
FEC Viterbi and Reed-Solomon
Viterbirate 1/2, 2/3, 3/4, 5/6, 7/8
Roll-off Factor 35 %
Demultiplexing according ISO 13818-1

Video decoder:
Video Compression MPEG-2 and MPEG-1 compatible
Video Standard PAL G/ 25 Hz
Video Formats 4:3 / 16:9
Letterbox for 4:3 TV-Device

 

Audio decoder:
Audiokompression MPEG-1 & MPEG-2 Layer I and II
Audio Mode Dual (main/sub), Stereo
Frequency: 32 kHz, 44.1 kHz, 48 kHz, 16 kHz, 22.05 kHz, 24 kHz

 

Output analog:
Output Level L/R 0,5 Vss on 600 Ohm
THD > 60 dB (1 kHz)
Crosstalk < -65 dB

 

Output digital:
Output Level 0,5 Vss on 75 Ohm
Sampled Data Filtering 32 kHz, 44.1 kHz, 48 kHz
S/PDIF-Output optical (AC3)

 

Video parameter:
Input Level FBAS 1 Vss +/- 0.3 dB on 75 Ohm
Teletext filter in conformity with ETS 300 472 Standard

 

TV-Scart:
Output: FBAS, RGB

 

USB:
USB 1.22:
Function: Update of Firmware

 

Ethernet:
10/100 MBit compatible interface

 

LNB Power and polarisation:
LNB Current 500mA max. ; short-circuit-protected
LNB Voltage vertical < 14V no load, > 11,5V at 400mA
LNB Voltage horizontal < 20V no load, > 17,3V at 400mA
LNB shut-off at Standby-Mode

 

Count of active satellite position:
DiSEqC 1.0/1.2 SAT POSITION / SAT OPTION
DiSEqC - Rotor Control

 

Power consumption:
< 10W / 12V

 

Input voltage:
DC12V +/- 15%

 

Extern power supply:
Input: 110-240V AC / 50-60Hz / 0,6A
Output: 12V = / 1A or 2A

 

Physical specification:
Ambient Temperature +15°C...+35°C
Humidity < 80%
Size (W x D x H): 195 mm x 130 mm x 30 mm
Weight: 540 g